Warning !!! Do Not Post Unrelated Topics in The Forum. You Will be banned Permanently.
ANNOUNCEMENT : We Are Deeply sorry For Deleting any posts in the forum. We are Working To improve our Board. Thank you
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5



How to Disable Drivers Signature Enforcement
Register or Login to view Links.

1. Register or Login to view Links. the Vcom Driver zip and extract the folder from inside on to the desktop.

2.Right click on Start then click on Device Manager

3.In the Device Manager Window click on the first item – your computer name

4.Click on Action then Add legacy hardware

5.On the Welcome to the Add hardware Wizard window click on Next button

6.Select Install the hardware that I manually select from a list (Advanced) and then click on Next button

7.Click on Show All Devices then on Next button

8.In the Add Hardware window click on Have Disk… button

9.In the Install From Disk window click on Browse… button
In the next window – Locate file – browse for the folder that you have extracted on the desktop at the beginning

10.Select the version of the driver according to your Windows 10 version – x64 for 64 bit and x86 for 32 bit and click Open button

11.Click the OK button to load the driver

12.From the list of drivers select MTK USB Port and click on Next button

 13.If a red warning window will open, click on Install this driver software anyway
This action will add the following drivers in to the operating system:
MediaTek DA USB VCOM Port
MediaTek PreLoader USB VCOM Port – for transferring the firmware to your device
MTK USB Modem Port
MTK USB port – for transfering PreLoader to your device (and recovery in case of bad or corrupt firmware)

>>Now we need to remove the device that we have installed but leave the drivers in the operating system.

1.To do that, in the Device Manager window we expand Ports (COM & LPT) section

2.Right-click and click Uninstall on the MTK USB Port

3.In the Confirm Device Uninstall window make sure that the box Delete the driver software for this device is empty
You need to leave the drivers in the operating system and only remove the device that you added

4.Click on the OK button to finalise

5.Now, when you will connect your dead (or turned off) MTK device to the Windows 10 computer by USB, the device will be recognized either trough a MediaTek Preloader USB VCOM Port interface or as a MTK USB port if it is bricked or it has bad/corrupt firmware. The SP Flash Tool will be able to transfer the firmware to your device trough this interfaces. Make sure you connect the device after you press the Download button in SP Flash Tool, as the communication interface will only be alive for 2 seconds if no data is being sent.

Show Us Some Love By : Register or Login to view Links.
Thanks given by:

Forum Jump:

Users browsing this thread: 1 Guest(s)