Warning !!! Do Not Post Unrelated Topics in The Forum. You Will be banned Permanently.
ANNOUNCEMENT : We Are Deeply sorry For Deleting any posts in the forum. We are Working To improve our Board. Thank you
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

HOW TO BACKUP FIRMWARES OF MEDIATEK DEVICES USING MIRACLE BOX OR MIRACLE THUNDER
#1

1. Download Miracle Box v2.27a + Loader

Register or Login to view Links.

Or

Miracle Thunder v2.82

Register or Login to view Links.

2. PC

3. USB cord

4. install Mediatek VCOM drivers

Register or Login to view Links.

Procedure

1. Extract the Miracle Box zip into a folder and launch Miracle loader exe



2. Wait till Miracle Box opens to the Dashboard



3. Click the MTK tab



4. Tick Read



5. Select the phone's chipset type from the dropdown



5a. If you want the backup saved in an SP Flash tool friendly format (with a scatter file) then tick Save as scatter file.



6. Click the Start button



7. You should now see >> Waiting for USB Port at the bottom left corner. Connect the phone to the PC (must be switched off still with battery inside) then press the Power button just once (this is to ensure that your device is detected immediately). DO NOT hold down the power button else the phone will boot up normally



8. If you did not tick Save as scatter file, a box should pop up. Navigate to the location you wish to save the firmware (in .bin format) then click Save



8a. If you ticked Save as scatter file then a box should popup asking you to select which block / partition you would like to backup. Tick all if you want a full firmware backup / dump or tick only what you need to backup then click OK



8b. Navigate to the location you wish to save the files to then click OK



9. Wait while Miracle Box begins backing up the phone. If you did not tick Save as scatter file, it should look something like



9a. If you ticked Save as scatter file, it should look something like



10. Once backup has been completed, you should see a Done message



11. Disconnect then power on the phone

Note

For the scatter backup, you can rename the file extensions in order to use them in SP flash tool, e.g recovery.bin to recovery.img

Show Us Some Love By : Register or Login to view Links.
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 1 Guest(s)