Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

HOW TO INSTALL SPREADTRUM DRIVERS ON PC
#1

HOW TO INSTALL SPREADTRUM DRIVERS ON PC

Requirement

1. Download SciU2S Android USB Spreadtrum Drivers.

Register or Login to view Link.

2. Download SCI android usb driver jungo v4

Register or Login to view Link.

3. Disable driver signature verification enforcement if using a Windows 8, 8.1 or 10 PC.

Register or Login to view Link.


4. Spreadtrum phone

PROCEDURE OR STEPS TO FOLLOW

1. Unzip SCI android usb driver jungo v4 to get its content

1b. Open the SCI-android-usb-driver-jungo-v4 folder > x64 (if you're using a 64 bit PC) or x86 (if you're using a 32 bit PC)

1c. Launch DPInst.exe and follow the driver installation Wizard.

1d. Unzip the SciU2S Android USB Spreadtrum Drivers zip file to get its content.



2. In Windows, go to Control Panel and open Device Manager.



3. Click any of the device groups (any of the items on the list) you see there, then from Action menu at the top, select Add legacy hardware



4. The Add hardware wizard will be launched, click Next



5. Select Install the hardware that I manually select from a list (Advanced) and click Next



6. Click Have Disk...



7. Click Browse... and locate your driver's .inf file is, then select it (Spreadtrum Drivers => SciU2S => x86/x64 for 32bit/64bit PC respectively => driver => SciU2S.inf)



8. Click Open and OK. You will see the drivers listed



9. Select your driver  (SCI Android USB2Serial) then click Next



9b. Click Next



10. Click Finish



10b. Your drivers should now Be on the list. Repeat the procedure for Spreadtrum Drivers => google-usb_driver => android_winusb.inf




11. Go to C: / Users/your-user-directory/.android/adb_usb.ini and open with any text editor like  notepad or notepad+
(if you can't find the file then download it  HERE Register or Login to view Link. and place it in the directory)

12. Add the following on a new line (This is Spreadtrum's USB Vendor ID)

Code:
0x1782

13. Connect the phone to PC without battery inside (switched off is fine if battery is not removable) and Windows will install some additional drivers


Note

If after installing the above driver and the phone still isn't detected, uninstall all SPD drivers using USB deview

Register or Login to view Link.

Then download and install SCIUSB2SERIAL

Register or Login to view Link.

SUPPORT US BY : Register or Login to view Link.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)